Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.
Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.
An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes
Gas-Pro IR detects potentially explosive gases in conditions where a pellistor-based catalytic sensor may struggle, especially in a low oxygen environment. The infrared measurement gives improved reliability and measures gas in two different wavelengths: one that absorbs gas and the other does not. With little chance of being poisoned, the Gas-Pro IR is inherently safer and saves the need of regular and expensive pellistor replacement when used in likely contaminated environments.
Size | 43 x 130 x 84mm (1.7 x 5.1 x 3.3ins) |
Weight | 309g 4 gas (10.8oz)/ 340g pumped (11.9oz)333g 5 gas (11.7oz)/ 362g pumped (12.7oz) |
Alarm | Audible >95dB @ 30cm (98dB @30cm in loud mode) Visual - all angle dual red/blue LEDs Vibrating alert |
Display | Top mount for ease of view with dual colour backlight (green/red) |
Logging | Data Logging: 125hr at 10-second intervals (45,000 logs) Event Logging: Alarm, over range, calibration, bump, on/off, TWA, 1000 events |
Battery | Rechargeable Li-ion, >14hr (13 hours pumped operation) based on CH4, O2, H2S, CO Typical charge time 7.5h |
Sampling | Internal pump as option |
Environment | Operating Temperature: -20°C to +55°C (-4°F to +131°F) Storage: -25°C to +65°C (-13°F to +149°F) Humidity: 10 to 95% RH+ Ingress Protection: Independently tested to IP65 and IP67 |
Compliance | FCC and CE. Complies with EMC Directive 2014/30/EU, EN50270 and ICES-003 |
Approvals | IECEx: Ex d ia IIC T4 Gb Tamb -20°C to +55°C ATEX: II 2 G Ex d ia IIC T4 Gb Tamb -20°C to +55°C UL: Gas detector use in hazardous locations Class 1, Division 1, Groups A, B, C, and D only as to intrinsic safety INMETRO |
Interface | Data connection for gas test solutions and direct to PC |
Charging | Direct connection to multi-regional power supply Vehicle charger adaptor Desktop cradle USB power and communications lead |